 Microterm
is a single-door intelligent controller designed to be installed
at or near the protected door. The Microterm is capable
of controlling all access control functions for one door,
including two-reader support. The two-reader configuration
is generally used for in-reader and out-reader applications.
It is possible to use the Microterm's 2-reader configuration
on two separate doors with certain limitations. This distributed
processor-based panel will operate as a standalone unit
in the event server communications is interrupted. The Microterm
is programmed via CIC CardAccess® software program.
Once programmed, the controller does not require continuous
server communications, as it automatically stores system
transactions in its internal memory. The Microterm (CICP1100)
has 2 inputs, 1 tamper alarm and 3 outputs, and is housed
in a steel enclosure.
The Microterm accepts industry standard Wiegand output
devices and supports virtually all card/reader technologies.
Proximity, Biometric, Magnetic Stripe, Barcode, Wiegand,
Barium Ferrite, Keypad and Smart Readers are easily connected
and controlled. The Microterm can store multiple card (bit)
formats in its internal memory, making it a cost-effective
retrofit panel. Supporting multiple bit formats allows existing
card populations and readers to remain in place. An optional
standby battery is available, providing 4-6 hours standby
power. The Microterm includes a lithium battery for up to
one year of data protection.
Up to 63 CIC Intelligent Controllers (Microterm, Miniterm,
Smarterm or Superterm) can be intermixed on the same communications
network. (A maximum of 31 Microterms are permitted on each
network.) Multiple communication networks (ports) can be
connected to the CardAccess® server for maximum system
expansion. Controller communication choices include: hardwire
(repeat or multi-drop mode), LAN/WAN, dial-up or fiber optics
for maximum flexibility. The Microterm supports RS232 and
RS422 communication formats for optimal system configuration.
This Intelligent Controller is UL Listed for UL294 (Access
Control System Unit), UL1076 (Proprietary Burglar Alarm
Unit) and UL1950 (Information Technology Equipment, replaced
with EN60950 in Q2/2003).
Microterm Capacities
|
